MachineryGuide AutoSteer, Руководство по установке программного обеспечения

Страница: 12 / 22

This menu allows the user to properly set up the software for their machinery. These
inputs serve as the base of the calculation done by the software, so the accuracy of
automatic steering highly depends on the accuracy of data given here by the user.
Option Comment/Function
1
Distance between the axles User shall measure and type in the
accurate value
2
Minimal turning diameter of the
machinery User shall measure and type in the
accurate value
3
Distance between the ball-joints User shall measure and type in the
accurate value
4
Position of the angle sensor Recommended installation is on the left
side
5
Extra torque 0% is proper for almost any type of
tractor. If the user experiences stall
detection frequently, then increase this
parameter
6
Enable Auto steering This checkbox enables or disables the
complete automatic steering function.
8
Wheel-angle calibration By clicking on this button, the
wheel-angle sensor calibration can be
done.
11