Macherey-Nagel QUANTOFIX Relax, Руководство пользователя

Страница: 70 / 192

Manual QUANTOFIX ® Relax
69
MN Manual QUANTOFIX ® Relax EN V 1.10 / 01.14
9. Measurements
The instrument is designed for the quick and easy measurement of test strips.
The following points outline set-up options with regards to measurements as
well as the actual measurement procedure.
9.1 Parameter selection
The instrument cannot detect different test strips for different parameters or
ranges automatically. Therefore, initially you have to activate the test strip you
want to measure. The currently activated test is displayed in the start screen
next to the button. Always make sure that the test strip you are using cor-
responds to the activated test.
To activate a particular test for a measurement, press . A new screen ap-
pears which includes up to 5 pre-defined tests (see 13.1.1 Favorites, p. 80).
To activate one of these favorites, press the corresponding button. The start
screen appears and the desired test is activated and is displayed next to the
button.
To activate a test that is not part of the favorites list, press
. . .
. A list with
all available tests appears. Use the arrows to select a test. Press
to
confirm your selection, the start screen appears and the desired test is activated
and is displayed next to the button. If you leave the list by pressing ,
your selection is not adopted.
Generally, the instrument saves the last used test and keeps it activated in the
start screen.
9.2 Sequence number
SN:
shows a continuous number for every measurement for a given day. The
counter starts at 0001. To change the sequence number, press
SN:
. The input
menu appears and you can enter the desired number.
For every new day, the sequence number is set back to 0001.
9.3 Sample ID
ID:
shows the sample ID for the next measurement. To enter or change the
sample ID, press
ID:
. The input menu appears and you can enter the desired
sample ID. Once you enter the sample ID,
� �
appears. You can lock the sample
ID by pressing
� �
,
�
x
�
appears. The following measurements are then always run
and saved using the same sample ID. Using the search mode (see 11.2 Search,
p. 74), you can retrieve the results from the instrument memory. Pressing
�
x
�
twice removes the lock. You can also enter the sample ID using a barcode scan-
ner or a keyboard (see 5.2.4 Barcode scanner / keyboard, p. 62).