Macherey-Nagel Nanocolor Vario C2, Руководство пользователя

Страница: 43 / 116

43 Manual heating block NANOCOLOR
®
VARIO C2 / VARIO 4 EN, 08.2021
12. Program selection
On the Home screen (Figure 4), select the desired temperature or time by pressing or
several times. By setting the values on the right side of the display, the right half of the
heating block is controlled. The same applies accordingly to the left side ( VARIO 4 only).
Call a pre‑programmed temperature. The last used temperature is always displayed
first. The keys work in jog‑roll mode. Only programmed temperatures from the smallest to the
largest are displayed.
Call a pre‑programmed time. The last used time is always displayed first. The keys op‑
erate in jog‑roll mode. Only programmed times from the shortest to the longest are displayed.
Press
to start the digestion (see Performing a digestion, page 48).
Figure 5: Home screen
12.1 Settings
Press on the Home screen to access the settings (Figure 5). Press to return to
the home screen. Pressing in the respective settings menus will return to the Settings
overview menu without saving the selection.
Figure 6: Settings