Macherey-Nagel Nanocolor Vario C2, Руководство пользователя

Страница: 42 / 116

42 Manual heating block NANOCOLOR
®
VARIO C2 / VARIO 4 EN, 08.2021
10. Initial operation
10.1 Turning on the device
Connect the heating block to the power supply and switch it on with the main I / O switch
(Figure 4, No.
G
) located on the back of the device. The device will start up and the manufac‑
turer’s logo will be displayed. After a few seconds the start screen will appear.
NOTICE
By pressing , the info screen will be displayed. The serial number, installed
software‑ as well as bootloader versions will be displayed.
NOTICE
The device must always be set up in such a way that the on / off switch can be operated at
any time.
10.2 Switching off
NOTICE
If you are not going to use the device for a longer period of time, take it out of operation and
disconnect it from the power supply.
To switch off the device, tilt the I / O switch on the back of the device (Figure 3, No.
G
) to the
right (O).
11. Operation and user guidance
NOTICE
Do not operate the touch screen with sharp or pointed objects, as this will damage the
screen.
The heating block has an illuminated, color touch screen display (Figure 4, No.
A
). The display
is operated by touching individual fields. Familiarize yourself with the operation of the touch
screen display by touching individual buttons with your finger or a special stylus. Touching
buttons selects the corresponding function.