1. Preface
The following user manual describes in detail how to print the measured data from
your
NANOCOLOR
®
UV
/
VIS
II /
VIS
II including all important additional information with
the
NANOCOLOR
®
Thermal printer very comfortable and without the additional need
of a PC. Please find further information about the thermal printer in the corresponding
user manual which can be found o
n the “Software/User´s Guide CD“ in the delivery
content.
2. Delivery Contents
The delivery content of instrument includes:
1
Thermal printer
1
Partition plate R for thermal paper rolls 58 mm
1
Partition plate L for thermal paper rolls 58 mm
1
Mains adapter: Input 100-240 V, Output 24 V 2.71 A
1
Thermal paper roll width 80 mm (REF 919 656)
1
Software/User´s Guide CD
1
This manual
3. Technical Data
Please find information about the technical data of thermal printer in the user´s
manual which can be found on the Software/User´s Guide CD (chapter
17. SPECIFICATION, page 35 following).
4. Operating Elements
❶
Release lever for opening the paper
tray
❷
Pressing the FEED button will start the
paper feed of the thermal printer.
❸
The LED-light flashes when turning on
the thermal printer. Please find further
information about the LED-light on the
Software/User´s Guide CD in the user´s
manual.
❹
Pressing the POWER button you will
turn the thermal printer on or off. For
turning off the printer, press the button for
at least 3 seconds.
❶
❷
❸
❹
