9
To ac ce ss the MS1 26 2 2 ” and 6 ½” dr i v e uni t s
1
Unscrew the rear access door.
2
Unscrew the drive unit and lift directly out of the box.
To ac ce ss the MS1 26 2 1 2” dr i v e uni t
1
Unscrew the rear access door.
2
Unscrew the cup for the 12”.
3
Disconnect the cables from the 12” unit. Pull the cables out through the cup. Move the
cup to the upper part of the cabinet to ease access to the 12”.
4
Unscrew the 12” drive unit. Unscrew the phase plug.
To mount t he MS12 62 12 ” dr i ve uni t
1
Mount the phase plug into the 12”. Make sure that the phase plug is placed horizontally
in the horn flare.
2
Mount the 12” into the baffle board.
3
Pull the cables through the plastic cup. Mount the cables on the terminal.
4
Mount the cup on the 12” drive unit.
To remov e t he MS12 62 horn f l a r e module
If all drive units needs to be serviced, it is easiest to remove the horn flare module.
1
Unscrew the grille.
2
Unscrew the horn flare screws on the cabinet sides.
3
Unscrew the access door.
4
Unscrew the four internal horn flare module brackets. Remove the horn flare module.
M S 1 2 6 2 C O N E K I T S
12” cone kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 50304010
6 ½” drive unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 05862002
2” cone kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 50304057