P
arallel system
If you require more speakers for better sound distribution and you only have a limited number of output channels
on your amplifier, you can connect more than one speaker to each channel. This can be done by linking the
speakers for each channel in parallel as illustrated. However always remember to check the minimum loading
impedance specified for the amplifier. The maximum number of C-range speakers that can be connected to each
amplifier channel is the impedance of the speaker divided by the minimum specified speaker impedance rating of
the amplifier (often 4 ohms).
Note!
CN8 and CM9 is 4 ohm
speakers. When running 2
speakers in parallel your
amplifier should be able
to run in a 2 ohm load.
Output
14
15
Amplifier
Terminal on speaker
Terminal on speaker
In/Link
In/Link
In/Link
In/Link
In/Link
In/Link
In/Link
In/Link
Mains
In/Link
In/Link
In/Link
In/Link