Mach Power WL-IWNAP48-062, Руководство пользователя

Страница: 30 / 32

30
CHAPTER 5
TROUBLE SHOOTING
The Failure phenomenon and solution:
Failure phenomenon Solution
SYS Indicator off Please make sure the PoE module con-
nection is right. POE Port connect with AP,
LAN port connect with computer
Can’t land to Wireless AP through Web
page Please check the IP address of computer
and Wireless AP to see whether they are
in same networking segment, The method
is click “start”-“Run” input“cmd”, ping
192.168.0.254 to test the Wireless AP
connectivity.
Reset Wireless AP and load it again;
Please make sure the IP address
192.168.0.254 is not occupied by other
device in Wireless AP’s networking;
Check computer and cable problem, re-
commend to use 10/100M UTP unshielded
cable;
Clean up Arp binding from “Start”-“Run”
input“cmd” arp –d
Clean the IE Brower’s temporary files and
Cache file;