EDIT:
To use this feature, press
EDIT
and then press the item you wish to edit, such as;
HOME Team HITS. You will notice a flashing cursor on the LCD display. Key in
the correct value on the numeric keypad and press
ENTER
.
HOME SCORE:
To increase the HOME score by one press the
+1
key on the
HOME SCORE
keypad. To decrease the HOME score by one press the
-1
key on the
HOME
SCORE
keypad.
GUEST SCORE:
To increase the GUEST score by one press the
+1
key on the
GUEST SCORE
keypad. To decrease the GUEST score by one press the
-1
key on the
GUEST
SCORE
keypad.
GAME KEYPAD:
To increase INNING by one press the
INNING
key
To increase BALL by one press the
BALL
key
To increase STRIKE by one press the
STRIKE
key
To increase OUT by one press the
OUT
key
To clear all balls and strikes for the next batter press the
NEW BATTER
key
ADDITIONAL INFORMATION
If at the end of a game the scoreboard is to be used to score another game press
and hold the
RESET
key for three seconds. All scoring information on both the
controller’s LCD and the scoreboard will be cleared, while all option settings will be
saved.
After the last game sim
ply turn the controller’s
POWER
switch
OFF.
All scoring
information and option settings will be saved and may be retrieved when the controller
is turned back on by pressing
ENTER
.
Shortly after the controller is turned off the,
PERIOD/INNING
digit on the
scoreboard will begin to flash and will continue to do so until power to the scoreboard
has been shut off at the scoreboard's power disconnect switch or circuit breaker.
After each use the controller and all accessories should be stored in a secure, dry
location.
NOTE: AFTER EACH USE POWER TO THE SCOREBOARD MUST BE TURNED
OFF AT THE SCOREBOARD'S POWER DISCONNECT SWITCH OR CIRCUIT
BREAKER. FAILURE TO DO SO WILL RESULT IN UNNECESSARY POWER
CONSUMPTION, SHORTEN THE LIFE OF THE DISPLAYS AND OTHER
ELECTRONIC COMPONENTS.
NOTICE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at their expense.
Содержание MSBBS3 LED
Страница 1: ......
