Mace DVR0404, Руководство по эксплуатации

Страница: 59 / 62

59
Chapter 6 Serial port operation
1
．
System setting of the Terminal
The system ’ s operation can also be done through RS232 port. The specific operation is as following ： First, copy “ Terminal ” and
“ system upgrade program ” to the computer. Connect the computer with the DVR through RS232 port. Run “ Terminal ” program and
create the connection between the computer and the DVR.
The setting information for the connection is: Baud rate — 115200bps
Data bit — 8 digits
Stop bit — 1 digit
Check — no need
Control on data flow — no
You can log in by username admin (default user with administrator power ) for the serial port login.
Login steps
：
Press any key to enter the login interface
，
which showing as following
：
＿ Username ： admin
Input the name; press the “ enter ” key. Then, input the password as following ：
＿
Password
：
admin
.
If the username and password are correct, system enter serial port management menu interface. The detailed functions are the
same as the menu setting.
2
．
Serial port upgrading operation
After the setting of above operation, please follow the below operation ：
Press any key to enter login interface as following ：
＿
Username
：
admin