UNLOADING AND ASSEMBLY
Form # 169080
Model Year - 2010
13
STEP 6. REMOVE FORMING
SHIELD
a. Position lift forks with extensions under forming
shield at front of header.
b. Cut shipping wire and remove four bolts at
front edge of forming shield.
c. Cut shipping wire (2 places) on aft end of
forming shield at rear of header.
d. Manually slide forming shield onto lift forks.
e. Remove five bolts and nuts on each door and
remove front angles and lift hooks. Retain lower
side bolt (A) for re-installation at same location
after hook is removed.
WARNING
Ensure cutterbar is completely clear of foreign
objects. These objects can be ejected with
considerable force when the machine is
started and may result in serious injury or
machine damage.
f. Thoroughly check cutterbar area for wooden
blocking, banding, and hardware that may have
fallen between discs.
g. Cut plastic ties at end curtains and remove
creases in curtains.
h. Ensure that curtains hang properly and completely
enclose cutterbar area. Minor creases in curtains
will eventually straighten out.
A
