215028
58
Revision A
1028472
A
B
Figure 7.18: Header Drive Gearbox
6.
Clean area around check plug (A).
7.
Remove check plug (A) with a 13 mm (1/2 in.) socket.
8.
Ensure lubricant is even with bottom of check hole (with
check plug [A] removed) or slightly runs out of the
check hole.
9.
If necessary, remove fill plug (B) and add lubricant to
gearbox through the fill hole until lubricant runs out of
check hole (with check plug [A] removed). Refer to
Recommended Lubricants, page 79
for a list of
recommended fluids, lubricants, and capacity for the
machine.
10. Reinstall the plug(s) and torque to 23 Nm (17 lbf·ft).
11. Close the left driveshield.
12. Lower the header fully.