![background image](http://html1.mh-extra.com/html/macdon/r1-series/r1-series_installation-instructions-manual_3196781014.webp)
214497
8
Revision D
3.2
Opening Cutterbar Doors
–
Export Latches
Machines sold outside North America require a tool-operated latch on the cutterbar doors. Follow these steps to open
cutterbar doors with export latches:
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Pull-types only:
Center the pull-type beneath the hitch, if both doors need to be opened.
2.
Shut down the engine, and remove the key from the ignition.
1015145
A
Figure 3.3: Cutterbar Door Latch Access Hole
–
Export Only
3.
Locate latch access holes (A) for each door.
1015146
A
Figure 3.4: Cutterbar Door Latch
–
Cutaway View
4.
Use a rod or screwdriver to press down on latch (A) and
release the cutterbar door.