12. Fill hydraulic oil reservoir.
Refer to
13. Reinstall plug (A) on the hydraulic oil tank.
14. Close the hood. Refer to
15. Dispose of used oil in a manner that complies with local
rules and regulations.
Figure 5.105: Reservoir Plug
5.12.3 Filling Hydraulic Oil
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Park windrower on level ground, and lower header and
reel so that lift cylinders are fully retracted.
2. Shut down the engine and remove the key.
3. Open the hood. Refer to
4. Turn plug handle (A) counterclockwise until loose and
then remove plug by pulling straight out.
NOTE:
When
fi
lling oil at a fast rate, the screen element in
the
fi
ll tube restricts the oil and makes it dif
fi
cult for
air to escape.
Figure 5.106: Plug Handle
214053
302
Revision A
Содержание M1240
