215634
46
Revision B
1034223
A
Figure 3.13: Leg Position on Frame
9.
Ensure bushings (A) are seated into the internal mechanism
in each slot on the leg.
1034225
A
B
C
C
D
Figure 3.14: Leg Position on Frame
10. Insert the leg into the frame. Line up the holes in the
bushings with the holes in the frame.
11. Insert pins (A) in the holes, then install long bolts (B),
caps (C), and nuts (D) to secure the leg and frame. Torque
the hardware to 136 Nm (100 lbf·ft).
NOTE:
If necessary, use a pry bar to align the holes.
12. Repeat Step
to Step
for the opposite
wheel leg.
1030952
A
B
Figure 3.15: Header Lift Linkage Shipping Pin
13. Remove lynch pin (A) and clevis pin (B) from the lift linkages
on both wheel legs.
IMPORTANT:
Failure to remove the clevis pin from the linkage can result
in damage to the linkage.