MacDon M Series, Инструкции по разгрузке и сборке

Страница: 24 / 396

UNLOADING THE WINDROWER
4. Lower assembly onto 127–152 mm (5–6 in.) blocks
as shown.
5. Remove chains from shipping frame.
6. Check for shipping damage and missing parts.
Figure 2.5: Windrower Shipping Assembly
on Blocks
2.2.2 Moving to Assembly Area: Forklift Method
CAUTION
To prevent injury to bystanders and avoid striking them with machinery, do NOT allow people to stand in
the unloading area.
CAUTION
Equipment used for unloading must meet or exceed the requirements specified in this section. Using
inadequate equipment may result in chain breakage, vehicle tipping, or machine damage.
Lifting Vehicle
Minimum Lifting Capacity 2 9072 kg (20,000 lb.)
IMPORTANT:
Forklifts are normally rated for a load positioned 610 mm (24 in.) forwards from the back end of the forks. To
obtain the forklift capacity at 1220 mm (48 in.), check with your forklift distributor.
WARNING
Be sure forks are secure before moving away from
load. Stand clear when lifting.
1. Approach the windrower from the hood end and slide
the forks underneath the lifting framework.
2. Raise the windrower off the platform and move to the
assembly area.
Figure 2.6: Forklift Method Lifting Points
2. At 1220 mm (48 in.) from back end of forks.
147962
10
Revision A