MacDon M 2009 Series, Руководство по сборке

Страница: 38 / 117

UNLOADING AND ASSEMBLY
Form 169542
38
Revision F
13. Remove the cap from fitting with yellow tie on
the valve block from inboard side of frame.
14. Loosen bolts, and mov e valve block to
improve access through hole in fram e for
wrenches when tightening fittings.
15. Retrieve matching hose, and make connection
on valve block. Tighten fitting.
16. Re-position valve block, and re-tighten bolts.
b. Connect drive hoses to pump as follows:
1. Remove caps, and attach hoses (green and
yellow ties) to matching fittings on top of
pump. Tighten fittings.
2. Remove caps, and attach hoses (red and
white ties) to matching fittings on b ottom of
pump. Tighten fittings.
c. Retrieve the two motor case drain hos es
(111312) at front frame, and the 7/8 in. tee fitting
on the hose from the pump.
d. Remove caps from the hoses only.
e. Remove one cap on tee fitting, and quickly attach
hose to minimize oil spillage.
f. Remove second cap from tee, a nd quickly
connect other hose.
g. Tighten fittings.
(continued next page)
YELLOW