![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672231.webp)
169441
219
Revision D
Installing Reel Drive Sprocket
–
D60
The reel drive sprocket is attached to the reel drive motor.
ϭϬϰϬϭϳϴ
A
B
C
Figure 4.197: D60 Reel Drive
1.
Align the keyway in sprocket (C) with the key on the motor
shaft, and slide the sprocket onto the shaft.
2.
Install slotted nut (B), and torque to 1.7 Nm (15 lbf
∙
in).
3.
Install cotter pin (A). If necessary, tighten slotted nut (B) to
the next slot to install the cotter pin.
ϭϬϰϬϭϳϳ
A
B
C
D
Figure 4.198: D60 Reel Drive
4.
Install drive chain (C) onto drive sprocket (D).
5.
Slide the motor and motor mount (B) up until the tension
on the chain is such that hand force deflects the chain
3 mm (1/8 in.) at mid-span.
6.
Tighten six bolts (A), and recheck the chain tension.
7.
Reinstall the drive cover. For instructions, refer to
.
Replacing Double-Reel U-Joint
The double-reel drive U-joint allows each reel to move independently from the other.
Lubricate the U-joint according to specifications. For instructions, refer to
Replace the U-joint if it is severely worn or damaged. For instructions, refer to
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......