![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672230.webp)
169441
218
Revision D
Installing Reel Drive Sprocket
–
D50
The reel drive sprocket is attached to the reel drive motor.
ϭϬϰϬϭϳϮ
A
B
C
D
Figure 4.195: D50 Reel Drive
1.
Align the keyway in sprocket (D) with the key on the motor
shaft, and slide the sprocket onto the shaft.
2.
Secure sprocket (D) with flat washer (C), lock washer (B),
and bolt (A).
3.
Torque the hardware to 24 Nm (18 lbf
∙
ft).
ϭϬϰϬϭϳϭ
C
A
B
D
Figure 4.196: D50 Reel Drive
4.
Install drive chain (C) onto drive sprocket (D).
5.
Slide the motor and motor mount (B) up until required
tension is achieved. The tension on chain (C) should be such
that hand force deflects the chain 3 mm (1/8 in.) at
mid-span.
6.
Tighten bolts (A) to 102 Nm (75 lbf
∙
ft).
7.
Reinstall the drive cover. For instructions, refer to
.
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......