![background image](http://html.mh-extra.com/html/macdon/d50/d50_operators-manual_685672218.webp)
169441
206
Revision D
1012795
A
B
C
Figure 4.174: Drive Cover
–
Double Reel
4.
Position upper drive cover (B) onto the reel drive and lower
cover (C), and secure it with six bolts (A).
Adjusting Reel Drive Chain Tension
The reel drive chain transfers power from the hydraulically driven reel motor to the sprockets that rotate the reels.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
1.
Shut down the engine, and remove the key from the ignition.
2.
Remove the reel drive cover. For instructions, refer to
Removing Reel Drive Cover, page 202
ϭϬϰϬϭϯϭ
A
B
C
D
Figure 4.175: D60 Reel Drive
–
Single Reel Shown,
Double Reel Similar
3.
D60:
Tension on chain (A) should be such that hand force
deflects chain 3 mm (1/8 in.) at mid-span. Adjust as follows:
a.
Loosen six bolts (B) on motor mount (D).
b.
Slide motor (C) and motor mount (D) until the required
tension is achieved.
c.
Tighten bolts (B) to 102 Nm (75 lbf·ft).
Содержание D50
Страница 101: ...169441 89 Revision D 10 Tighten bolts B OPERATION ...
Страница 124: ......
Страница 295: ...topsoil moisture 83 types 80 weather and topography 83 WOT definition 19 INDEX ...
Страница 296: ......