215184
335
Revision A
1023276
A
Figure 9.62: Case IH Combine Display
9.
From REEL DRIVE TYPE menu (A), select one of the
following:
•
4 if you are using a standard 19-tooth drive sprocket.
•
5 if you are using an optional high-torque 14-tooth drive
sprocket.
•
6 if you are using an optional high-torque 10-tooth drive
sprocket.
1023920
A
Figure 9.63: Case IH Combine Display
10. From REEL HEIGHT SENSOR menu (A), select YES.
1025382
A
Figure 9.64: Case IH Combine Display
11. Locate AUTOTILT field (A).
•
If using a two-sensor system:
Select YES in the
AUTOTILT field.
•
If using a single-sensor system:
Select NO in the
AUTOTILT field.
Checking Voltage Range from Combine Cab
–
Case IH 5130/6130/7130; 5140/6140/7140
NOTE:
Changes may have been made to combine controls or display since this document was published. For instructions, refer to
the combine operator
’
s manual for updates.