214805
57
Revision A
1005264
A
B
C
D
E
Figure 3.116: Windrower Hoses and Harness
Connected to Header
–
4.2 m and 4.8 m (14 ft. and
16 ft.) Header Shown (5.4 m [18 ft.] Header Similar)
6.
Route hoses (A) from the windrower through support (B)
and access hole (C) in the header frame alongside hose
bundle (D).
NOTE:
Hose bundle (D) will be attached later in the procedure.
7.
Remove the cover on header electrical receptacle (E).
8.
Push the connector onto the receptacle, and turn the collar
on the connector to lock it in place.
9.
Attach the cover to its mating cover on the windrower
wiring harness.
10. Clean the hydraulic couplers to prevent damage or
contamination from accumulating dirt. Remove the caps
from the hydraulic couplers.
1012152
A
B
C
D
Figure 3.117: Hose Connections on Standard Header
–
4.2 m and 4.8 m (14 ft. and 16 ft.) Header Shown
11. Connect the four hoses from the windrower to the mating
receptacles on the header. Ensure the hose collar snaps into
the lock position.
•
Reel/auger pressure (A)
•
Knife and conditioner return (B)
•
Case drain (C)
•
Knife and conditioner pressure (D)
1010961
A
B
C
D
Figure 3.118: Hose Connections on Standard Header
–
4.2 m and 4.8 m (14 ft. and 16 ft.) Header Shown
•
Reel/auger pressure (A)
•
Knife and conditioner return (B)
•
Case drain (C)
•
Knife and conditioner pressure (D)
Содержание A40-D
