MacDon A40-D, Инструкции по разгрузке и сборке, Страница: 26 / 132

214805
18
Revision A
1027108
A
B
B
D
C
A
Figure 3.23: Left Side Deflector and Hardware
3. Install left side deflector (A) using nuts and bolts (B) and
nut, bolt, and five washers (C) retained from the previous
step. Torque all nuts to 11.5 Nm (102 lbf·in).
NOTE:
Do NOT install nut (D) if the pan extension
’
s width will be
adjusted.
NOTE:
Do NOT torque nuts if the pan extension
’
s width will be
adjusted.
4. Repeat steps for installing the pan extension on the
opposite side of the header.
To adjust a pan extension
’
s width, do the following:
1027112
A
B
C
Figure 3.24: Left Side Pan Extension
1. Remove nut and bolt (A).
2. Loosen nut (B), but do NOT remove.
3. Slide pan extension (C) with swath forming rods inboard to
the desired position, aligning holes on the pan extension
and header.
1027113
A
B
C
Figure 3.25: Left Side Pan Extension
4. Replace bolt and nut (A). Torque nut (A) and nut (B) to
11.5 Nm (102 lbf·in).
5. Install nut and bolt (C) and torque to 11.5 Nm (102 lbf·in).
6. Repeat for adjusting the pan extension on the right side of
the header.
ASSEMBLING THE MACHINE