Form # 147277
22
Issue 12/05
HEADER OPERATION
Operating Variables (continued)
To adjust delivery opening width (continued)
2. Remove screws from draper connector slat.
3. Use the following chart to position draper connector tubes at the appropriate rows of holes and position
rollers at center opening for the desired application.
CONNECTION
CENTER DELIVERY
OPENING WIDTH (W)
(between
rollers)
LEG TO
ROLLER EDGE
(DIM.
X)
DESIGNATED APPLICATION
and
COMMENTS
Row A to Row F (both drapers)
33.9" (860 mm)
22.4" (568 mm)
Opening for combine models: Case 60 &
66 Series, NH CR 920/940/960 & Gleaner
Row A to Row G (both drapers)
39.7" (1010 mm)
19.4" (493 mm)
Opening for Case 77, 80 & 88 series
combines
Row A to Row E (both drapers)
41.7" (1060 mm)
18.4" (468 mm)
Opening for CNH AFX, NH-CR 970/980,
Challenger 660 and MF 9690
Row A to Row H (both drapers)
49.6" (1260 mm)
14.4" (365 mm)
Opening for Lexion 450, 460R, 470, 470R,
475, 560, 560R, 570R, 575R, 580, 580R &
585R Combines
Row J to Row D (both drapers)
53.5" (1360 mm)
12.4" (315 mm)
Opening for combine models:
JD STS,
CTS, 9500, 9510, NH CX, Challenger 670
and MF 9790
Row A to Row C (both drapers)
59.5" (1510 mm)
9.6" (243 mm)
Opening for combine models: JD 9600,
9610, 9650 and Lexion 460, 465, 480,
480R, 485 & 485R Combines
Row A to Row B (both drapers)
65.8" (1670 mm)
6.4" (163 mm)
Maximum opening for windrowing