
QUICK SETUP
Switching your Droid on and off
The on/off switch is located on the upper section of the rear of the frame. This
slide switch should be switched towards the barrel of the marker to switch the
marker on. Slide the switch the opposite direction to switch the marker off. Suc-
cessful power up is indicated by the LED on the side of the wrap around grip.
Firing your Droid
If a Paintball is loaded in your Droid, and the power is switched on, you may
fire the Droid by pulling the trigger. If a paintball is not loaded, then you need to
either load one, or read the section below on disabling the beam sensor.
Understanding the beam sensor
Your Droid is equipped with a visible light sensor to determine if a paintball is
correctly loaded. This system is used to prevent accidental ball breakage due to
misloaded paintballs. The LED indicator on the side of your grip will show you
the status of the beam sensor:
Green: Ball is loaded
Red: Ball is not loaded
Flashing Orange: Sensor malfunction
Flashing Red: Sensor disabled
Disabling the beam sensor
To disable the sensor (for dry firing), hold the trigger in until the indicator LED
begins flashing red. You can re-enable the beam sensor the same way.
Ball
Loaded
No Ball
Loaded
Содержание DROID
Страница 1: ...OWNERS MANUAL...
Страница 6: ...KNOW YOUR DROID 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 17 18...