MACDEV DROID, Руководство пользователя

Страница: 19 / 32

Maintaining the drive train
The drive train is the hardest working part of your Droid. To work well, it should be cleaned and relubri -
cated using the MacDev Militia Lube included with your Droid.
Before working on the drive train, ensure that your Droid is depressurised, switched off and has no paint
inside. To remove the drive train assembly, first you must remove the top locating screw. Then remove
the back cap, and use the short end of your allen key to hook the slots on the rear of the drive train. You
should then be able to pull the drive train out of your Droid.
Now that the drive train is out of the marker, you can put the marker body aside to concentrate on the
drive train.
Disassemble the drive train by unscrewing the keg, joiner and valve keg. You can now remove the bolt.
Unscrew the power tube cap and remove the power tube and valve.
All of the internal parts are now separated, so clean the old grease off them using a clean cloth, and
clean the old grease out of the keg and valve keg bores using a q-tip.
18
Contents
Know your Droid
Quick Setup
Using your Droid
Advanced Setup
Maintenance
Parts List
Troubleshooting