MacAllister MGTP254, Руководство оператора

Страница: 13 / 20

PREPARING TO WORK 7
EN
CHECKING THE MACHINE
Before starting work please:
– check that all the screws on the machine and the
cutting device are tightly fastened;
– check that the air filter is clean;
– check that the protection devices are well fas-
tened and working efficiently;
– check the handgrips are well fastened.
PREPARING THE FUEL
This machine is fitted with a two-stroke engine
which requires a mixture of petrol and lubricating
oil.
Using petrol alone will dama-
ge the motor and will cause for invalidation of the
warranty.
Only use quality fuels and
oils to maintain high performance and guarantee
the duration of the mechanical parts over time.
• Petrol characteristics
Only use unleaded petrol with a fuel grade of at
least 90 N.O.
Unleaded petrol tends to cre-
ate deposits in the container if preserved for more
than 2 months. Always use fresh petrol!
• Oil characteristics
Only use top quality synthetic oil specifically for
two-stroke engines.
Your dealer can provide you with oils which have
been specifically developed for this type of engine,
and which are capable of guaranteeing a high level
of protection.
The use of these oils makes it possible to prepare
a 2% mixture, consisting in 1 part oil to 50 parts
petrol.
IMPORTANT
IMPORTANT
IMPORTANT
• Preparation and preservation
of the fuel mixture
Petrol and the fuel mixture are highly inflam-
mable!
– Keep the petrol and fuel mixture in homolo-
gated fuel containers, in safe place, away
from any flames or heat sources.
– Never leave the containers within the reach
of children.
– Never smoke whilst preparing the mixture
and avoid inhaling the petrol fumes.
The chart indicates the amount of petrol and oil to
use to prepare the fuel mixture according to the
type of oil used.
To prepare the fuel mixture:
– Place about half the amount of petrol in a ho-
mologated tank.
– Add all the oil, according to the chart.
– Add the rest of the petrol.
– Close the top and shake well.
The fuel mixture tends to
age. Do not prepare excessive amounts of the fuel
mixture to avoid deposits from forming.
Keep the petrol and fuel mix-
ture containers separate and easily identifiable to
avoid the mistake of using one in place of the other.
Periodically clean the petrol
and fuel mixture containers to remove any eventual
deposits.
IMPORTANT
DANGER!
IMPORTANT
IMPORTANT
5. PREPARING TO WORK
Petrol Synthetic oil 2-stroke
liters liters cm
3
1 0.02 20
2 0.04 40
3 0.06 60
5 0.10 100
10 0.20 200