MacAllister MCSP40 Скачать руководство пользователя страница 58

Страница: 58 / 62

MCSP40

by MacAllister

detail...

Technical and legal information

Safety warnings

Emergency

Familiarise yourself with the use of this product by means of

this instruction manual. Memorise the safety directions and

follow them to the letter. This will help to prevent risks and

hazards.

Always be alert when using this product, so that you can

recognise and handle risks early.

Fast intervention can

prevent serious injury and damage to property.

Stop the engine and unplug the spark plug connector if there

are malfunctions.

Have the product checked by a qualified

professional and repaired, if necessary, before you operate it

again.

In case of fire stop the engine and unplug the spark plug

connector.

Take fire-extinguishing measures immediately if the

product switch is no longer accessible.

WARNING!

Never use water to extinguish a product

on fire. Burning fuel must be extinguished with special

extinguishing agents. We recommend that you keep a

suitable fire extinguisher within reach in your work area!

Residual risks

Even if you are operating this product in accordance with all

the safety requirements, potential risks of injury and damage

remain. The following dangers can arise in connection with the

structure and design of this product:

Health defects resulting from vibration emission if the product is

being used over long periods of time or not adequately managed

and properly maintained.

Injuries and damage to property due to broken application tools

or the sudden impact of hidden objects during use.

Danger of injury and property damage caused by flying objects.

Injuries and damage to property to due to thrown and fallen

objects.

MNL_MCSP40_DFT_GB_V06_111108.indd 58

11/8/11 11:10:58 AM

Содержание MCSP40































































Результаты поиска

Содержание MCSP40

Отзывы:

Похожие инструкции для MCSP40

Бренды по названию

Популярные бренды

MacAllister MCSP40, Начало работы

Результаты поиска

Содержание MCSP40

Отзывы:

Похожие инструкции для MCSP40

Бренды по названию

Популярные бренды