08
MCS2000
by MacAllister
Before you start
Getting
started...
GB
IE
Assembly
Set the product on a suitable flat
>
surface.
Turn the tension wheel (8) until
>
the chain “tie straps” are just
touching the bottom edge of the
guide bar (4) (Fig. 8).
8
4
7
Fig. 8
Check the chain tension using one hand to lift the saw chain
>
(3) against the weight of the product. The correct chain tension
is achieved when the saw chain can be lifted by approximately
2 - 4 mm from the guide bar (4) in the centre (Fig. 9, 10).
2-4 mm
Fig. 9
Fig. 10
Turn the locking wheel (7) to
>
tighten the cover (9) completely
(Fig. 11).
7
a
b
Fig. 11
MNL_MCS2000_DFT_GB_V06_111108.indd 8
11/8/11 5:11:09 PM
