MANUAL
DT-2100
58
SEARCHING FOR CHANNELS
After adjusting the settings for the required transponders, a channel
search will be carried out. A QPSK lid (yellow LED, constant light)
must be present in order to find any channels. If the alarm lights up (red
LED) the installation and settings must be checked.
ENTER
Select YES and press the Enter button to start the channel search.
The display indicates that the search is in progress. After completion
a menu will appear displaying all channels which were found on
the transponder. Select NO to set the PID, see page 61.
Use the Up/Down buttons to select a required channel.
ENTER
Press the Enter button and after a few seconds the channel will
be displayed on the TV screen.
Important
: PIDs are only to be used when you have problems finding
a required channel.
CHANGING CHANNEL
Switching to another channel within the transponder is simply done by
using the buttons and the display on the front panel of the DT-2100.
Press the Left button.
Use the Up/Down buttons to select a channel.
ENTER
Press the Enter button and after a few seconds the channel
will be displayed on the TV screen.
START TRANS
SCAN
YES
SCANNING....
PLEASE WAIT
DISCOVERY
(VIDEO)
DISCOVERY
Programming
00983-4 DT-2100 ENG-1.p65
2001-03-29, 11:20
58
