25
USER MANUAL DCB-101
SECTION 9
VCR recording
Following is a description of how to record a programme from the digital-
box. There are different sections describing a number of ways of how to
record a programme and at the same time view this or another programme.
To be able to use all the recording alternatives, a complete installation
of scart and coaxial (UHF)-leads is required. Even the switching facilities
on your TV determine if all alternatives are possible.
AU-mode
is the mode where you choose to view or record via the scart-
lead. Something that enhances the picture and audio quality in
comparison to the ordinary coaxial (UHF)-lead. In the information
box to the right, it is described how different types of TV’ s and VCR’s
can name the AU-mode on the remote control and in the user manuals.
To switch between digital-box, TV or VCR-mode you use the TV/VCR-key on the
remote control.
NORMAL
The digital-box have priority and the programme
selected on this is shown.
VCR
The VCR has priority and the programme selected
on the VCR is shown. If the VCR is put in PLAY-
mode, the digital-box will automatically go into
AU-mode and the movie will be shown.
TV
The TV has priority and you can use the TV-remote
to select among the basic channels tuned on your TV.
NECESSARY SETTINGS
Basic channels
(analogue channels) that must be tuned and saved at
the respective channel button on your TV and VCR.
Output channel
(factory pre-set to ch 22) from the digital-box must
be tuned and stored on the TV and VCR.
OBSERVE!
When the digital-box is started and is connected with a scart-
lead between TV and VCR, the digital-box takes priority and show
the selected programme directly on the TV. If then the VCR is put
in PLAY-mode, this will take priority over the TV and show the
videotape instead.
INFORMATION BOX
The AU-mode can be named
differently on various TV and VCR
remote handsets. Following are the
most common names:
AU/0
AV (A1 and A2)
Line in (L1 and L2)
Key 0 on the remote
Содержание DCB-101
Страница 2: ...2...
