14.1.
To improve the power of the boiler, is absolutely necessary to clean the coil. Effect this operation
in the following way:
14.1.1.
Get off the group boiler burner from the machine and to separate the boiler from the
burner.
14.1.2.
Remove the cover of the boiler.
14.1.3.
Remove the band of the boiler freeing the serpentine one.
14.1.4.
Use a rigid brush to eliminate the soot from the serpentine and an aspirator for the dust.
14.1.5.
Reassemble the band, the cover and the burner again installing the group boiler burner
on the machine.
15.
Electrodes
15.1.
Periodically check the position of the electrodes so that to guarantee the best combustion and
to avoid the formation of the soot.
16.
Fuel filter
16.1.
To avoid the seizure or the breakup of the pump, because of the impurities in the fuel, the
circuit of the fuel is equipped with a filter, that must periodically be gotten off, and cleaned with
a jet of compressed air. The substitution of the filter is advisable when an effective cleaning
becomes impossible.
17.
Water filter
17.1.
Monthly check the filter of the water, both that predisposed on the machine and the possible
one installed by the consumer on the line of supply.
18.
Demolition
18.1.
To allow the recycling of the raw materials, it is to separate well: pack (if supplied), the
exhausted oils and the lubricants, the electric motors, metallic pieces, parts and components in
plastics.
18.2.
It is compulsory to respect the norms in force related to the production, detention, harvest and
disposal of the refusals, according to what established by the legislative decree 22/97. The
exhausted oils must be delivered to the National Consortium Obligatory, while possible packings
must be digested according to what established by the title II of the legislative decree 22/97.
18.3.
ATTENTION: Maer Idropulitrici society does not assume any responsibility for damages to things,
