MAC 6000, Руководство пользователя

Страница: 32 / 176

29
MAC 6000 Hydronic Heater
Trailer Axle Manual
2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
Trailer Axle Manual
6
Rev: 07.25.2013
BEARING LUBRICATION - GREASE
Bearing grease should be replaced every 12,000 miles or 12 months, whichever comes
first. Remove all old grease from wheel hub and bearings first. Bearings should be
packed by machine if possible. Packing bearings by machine is preferable; however,
packing by hand is a viable alternative.
Follow these procedures to repack bearings by hand:
1. Place grease into the palm of your hand (Fig. 1).
2. Press widest end of bearing into the outer edge of the grease pile, forcing grease
into the inner area of the bearing between two adjacent rollers (Fig. 2).
3. Repeat this process while turning bearing from roller to roller until all rollers are
coated.
4. Apply a light coat of grease into the bearing cup surface.
5. Reassemble bearing into cup.
Fig. 1 Fig. 2
Recommended Wheel Bearing Grease Specifications
Thickener Type Lithium Complex
Dropping Point 230
°
C (446
°
F) Minimum
Consistency NLGI No. 2
Additives EP, Corrosion, & Oxidation Inhibitors
Base Oil Solvent Refined Petroleum Oil
Base Oil Viscosity @40
°
C (104
°
F) 150cSt (695 SUS) Minimum
Viscosity Index 80 Minimum
Pour Point -10
°
C (14
°
F) Minimum
Approved Sources
Mobil Oil Mobilgrease HP
Exxon/Standard Ronex MP
Kendall Refining Co. Kendall L-427
Ashland Oil Co. Valvoline Val-plex EP Grease
Pennzoil Prod. Co. Premium Wheel Bearing Grease 707L
Bearing Lubrication - Grease