MAC TOOLS MPF980381, Инструкция по эксплуатации

Страница: 2 / 65

MACTOOLS.COM
2
TABLE OF CONTENTS
Introduction 2
Safety Instructions
2 - 8
Maintenance 9 - 10
Specifi cations 11
Tool Components 12 - 19
Contact Information 21
INTRODUCTION
The Mac Tools MPF980381, MPF980501, MPF990381, MPF990501C, MPF990501 and MPF992501 Impact
Wrenches are precision-built tools, designed for driving, tightening and loosening threaded fasteners, usually
nuts and bolts, when fi tted with a suitable impact socket. These tools will deliver effi cient, dependable service
when used correctly and with care. As with any fi ne power tool, for best performance the manufacturer’s
instructions must be followed. Please study this manual before operating the tool and understand the safety
warnings and instructions. The instructions on installation, operation and maintenance should be read carefully,
and the manual kept for reference. NOTE: Additional safety measures may be required because of your parti-
cular application of the tool. Contact your
Mac Tools representative or distributor with any questions concerning
the tool and its use.
MACTOOLS.COM Mac Tools • 505 North Cleveland Avenue • Westerville, Ohio 43082 800.MACTOOLS
Mac Tools-Europe, Stanley Black & Decker Inc. • Unit 3, Europa Court
Sheffi eld Business Park • Sheffi eld, S9 1XE 0114 2917266
Defi nitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal
injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury .
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury .
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury .
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage .
The label on your tool may include the following symbols. The symbols and their definitions are as follows:
V ................... volts
Hz ................. hertz
min ............... minutes
or DC ..... direct current
.................. Class I Construction (grounded)
…/min ........... per minute
BPM .............. beats per minute
IPM ............... impacts per minute
RPM .............. revolutions per minute
sfpm .............. surface feet per minute
SPM .............. strokes per minute
A ................... amperes
W .................. watts
or AC ........ alternating current
or AC/DC .. alternating or direct current
.................. Class II Construction (double
insulated)
no ................. no load speed
n ................... rated speed
.................. earthing terminal
.................. safety alert symbol
................. visible radiation
................. respiratory protection
................. eye protection
................. hearing protection
IPxx ............... ingress protection
.................. do not incinerate