Page
6
of
9
Copyright 2021
–
MAC Rail LLC. Fort Worth, Texas 76244 wwww.macrailproducts.com
STEP 5
–
CONDUIT FIT
After cutting the conduit flush, we are now going to glue the ends to the adjacent wire
leg. Using a toothpick apply CA to the side of the conduit wire that will make contact
with the legs.
Using the other end of the toothpick (with glue on it), gently work the conduit wire over
to the leg and hold it until glue sets.
** Recommend placing the box back on painters
tape like step 2 as you will need both hands**
. Repeat for other leg then let dry.
