Mac allister MPWP2100-2, Руководство пользователя

Страница: 4 / 26

6
7
MPWP2100-2
By MacAllister
MPWP2100-2
By MacAllister
Safety information
Getting
Started . . .
Getting
Started . . .
Safety information
38.
W
ARNING:
Check before each use, and at regular intervals,
that all metal fasteners are tight and the product’
s components
are in good condition; inspect for broken or worn parts.
39.
W
ARNING:
Use only detergents compatible with the high
pressure hose / electrical power cord cladding materials.
40.
W
ARNING:
A
void skin contact with detergents, in particular
eyes with clean water and seek immediate medical attention!
41.
W
A
RNING:
Never transport the product at vertical position
to prevent user injury
.
42.
Please wear appropriate personnel protection equipment (PPE) while operating the equipment, e.g. safety boots, safety gloves, safety helmets with visors, hearing protection etc.
V
ibration and noise reduction
To
reduce the impact of noise and vibration emission, limit the
time of operation, use low-vibration and low-noise operating modes as well as wear personal protective equipment.
Ta
ke
the following points into account to minimize the vibration and noise exposure risks: •
Only use the product as intended by its design and these instructions.
•
Ensure that the product is in good condition and well maintained.
•
Use correct application tools for the product and ensure they in good condition.
•
K
eep tight grip on the handles/grip surface.
•
Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
•
P
lan your work schedule to spread any high vibration tool
use across a number of days.
28.
W
ARNING:
Do not move the product by pulling on the
pressure hose.
29.
W
ARNING:
When directed towards tyres, tyre valves or other
pressurised components, the high pressure jet is potentially dangerous. Do not use the rotating nozzle kit, and always keep the jet at a distance of at least 30 cm during cleaning.
30.
W
ARNING:
Protected all electrical conductors against the
water jet.
31.
W
ARNING:
During start-up, the product may generate
interference on the electricity supply system.
32.
W
ARNING:
Use only authorised electrical extension cords
with suitable conductor gauge.
33.
W
ARNING:
High pressure may cause parts to rebound:
wear all the protective clothing and equipment needed to ensure the operator
’s
safety
.
34.
W
ARNING:
pulling the trigger
.
35.
W
ARNING:
Comply with the regulations of the local water
supply authority
. Under
EN 12729
(T
ype BA) the product
can be connected directly to the mains drinking water supply device with drainage facility
. Make sure that the hose is at
least a diameter of
12.7
mm(
1/2
”) and is reinforced!
36.
W
ARNING:
Maintenance and/or repair work on electrical
37.
W
ARNING:
Discharge residual pressure before disconnecting
the hose from the product.
GP65-3663602939702-EN-V06.indd 6-7
11/2/16 6:05 PM