Mac allister MPWP2100-2, Руководство пользователя

Страница: 19 / 26

36
37
MPWP2100-2
By MacAllister
MPWP2100-2
By MacAllister
In
more
detail
. . .
In
more
detail
. . .
Care and maintenance
Care and maintenance
Power cord
If the power cord is damaged, it must be replaced by the manufacturer
, its service agent
UK plug
.
IMPORT
ANT
:
The wires in the mains lead are coloured in accordance with the following
code: Blue – Neutral Brown – Live
Y
ellow/Green – Earth
As the colours of the wire in the mains
lead of this product may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows.
The green and yellow wire must be connected to the
terminal in the plug, which is marked with the letter
E
or with the earth (
) symbol or
coloured green and yellow
. The wire, which is coloured blue, must be connected to the
terminal, which is marked with
N
or coloured black.
The wire, which is coloured brown,
must be connected to the terminal, which is marked
L
or coloured red.
E
N
L
Green and Y
ellow Earth
13AMP
fuse
approved to BS 1362 Brown
L
(Live)
Cable grip
Connect Blue to
N
(Neutral)
Outer sleeve
Rotary nozzle
Remove any dirt deposits from the nozzle hole using the cleaning needle (
4a
) (Fig.
39
).
Fig.
39
4a
14
Filter
1.
Remove the water inlet hose connector
(7)
from the water inlet
(5)
.
2.
Use a damp tool to disassemble the water inlet hose connector
(7)
(Fig.
40
).
3.
Rinse the parts with clear water (Fig.
41
).
Fig.
40
7
Fig.
41
From time to time, according to the hardness of your tap water
, calcium deposits in
the product and accessories.
The strength of the deposits (and thus the frequency of
product is used. Check with your local water company in order to establish the hardness of the water in your area.
NOTE:
These substances are readily biodegradable and environmentally friendly!
1.
Make a mixture of one part vinegar and two parts hot water
”
50
°C) in a suitable
container
,e.g. in a bowl.
2.
Lay the container e.g. accessory parts in the mixture.
3.
Leave the parts in the mixture for approximately
12
hours.
4.
Then rinse the parts with clear water
.
GP65-3663602939702-EN-V06.indd 36-37
11/2/16 6:05 PM