MGS1815-Li
by MacAllister
Getting
started...
Before you start
EN
23
WARNING!
The direction of the saw chain ‘cutters’ must be as indicated
by the symbol and arrow on the guide bar! Ensure the guide bar and
VDZFKDLQDUHSURSHUO\DVVHPEOHGLQFRUUHFWGLUHFWLRQRWKHUZLVHWKH
saw chain cannot work.
6. Screw the tension screw (3) clockwise out to adjust the tension pin (20) /
guide bar (5) towards the right to tighten the saw chain (4) using the supplied
multi-tool (24) (Fig. 4, steps 1, 2).
7. Align the spigot (15a) with the location hole (17) and place the sprocket cover
(15) over the mounting bolt (19) (Fig. 4, step 3).
8.
5H¿W WKH VSURFNHW FRYHU
(15) and slightly tighten
the locking wheel (16)
clockwise (Fig. 4, step
4). Ensure that the spigot
(15a) engages correctly
in the location hole (17).
Do not tighten the locking
wheel (16) completely as
saw chain tensioning is
UHTXLUHG¿UVW
9. Place down the ring handle
(16a) on the locking wheel
(16) afterwards (Fig. 4,
step 5).
17
19
4
5
15a
15
16
16a
17
20
3
5.
4.
2.
1.
3.
Fig. 4
NOTE:
The saw chain (4) has not yet been tensioned. Tension the
chain as described under “Saw chain tensioning”. After operating the
product for approx. 1 hour, adjust the chain tension again.
Saw chain tensioning
$OZD\VFKHFNWKHVDZFKDLQWHQVLRQEHIRUHXVHDIWHUWKH¿UVWFXWVDQGUHJXODUO\
GXULQJ XVH DSSUR[ HYHU\ ¿YH FXWV 8SRQ LQLWLDO RSHUDWLRQ QHZ FKDLQV FDQ
lengthen considerably. This is normal during the break-in period and the interval
between future adjustments will lengthen quickly.
MNL_MGS1815-Li_Cordless Garden Saw 18V_GB_V1_220408.indd 23
2022/4/8 12:01 PM
