mabe SME26N5XNBCT0, Руководство пользователя

Страница: 25 / 29

11
steps for troubleshooting
Save time and money! First review the boxes in these next few pages and
maybe you won’t have to call for service.
problem possible causes what to do
The dryer won’t
turn on
The dryer does not
generate heat
The dryer shakes
or makes noise
Greasy stains on
the clothing
The dryer is disconnected
Blown fuse / circuit breaker
tripped
Blown fuse / circuit breaker
tripped
Some shaking and noise is
normal. The dryer may be
seated unevenly
Inappropiate use of fabric
softener
You are drying dirty articles
together with clean ones
The clothing was not
completely clean
Make sure the dryer plug is completely
in the outlet.
Check the fuse box or circuit breaker of
the house and replace the fuse or
restart the breakers. note: Most of the
electric dryers use two fuses or breakers.
Check the fuse box or circuit breaker of
the house and replace the fuse or
restart the breakers.
Move the dryer to an even surface, or
adjust the leveling feet as necessary
until even
Follow the instructions on the fabric
softener packaging
Only use your dryer to dry clean
articles. Dirty articles can stain your
clean ones or the dryer itself
Sometimes stains that you cannot see
when the clothes are wet show up after
drying. Use the appropiate wash
procedures before drying
Lint on the clothing
There’s static
electricity
Inappropiate sorting
Static electricity can
attract lint
Overloading
Paper tissues, etc. in the
pockets of clothing
You didn’t use fabric softener
The clothing came out
too dry
Synthetics, permanent
press and mixtures can
cause static
Separate items that shed (like chenille)
from those that collect lint (like
corduroy)
See the suggestions in this section under
the subtitle Static
Divide large loads into small ones
Empty all pockets, before washing and
drying clothers
Try a fabric softener
Try a fabric softener
Adjust the controls to dry less
Try a fabric softener