7
In order to ensure the water dispenser with enough stability, users
should follow below instructions to fix the unit:
1. Remove one of the body rear’s screw (upper right corner or upper
left corner) (Picture 1)
2. Install a bracket where you have removed the screw already, fix
the bracket tightening the removed screw on the right location
(Picture 2)
3. Fix the bracket on the wall side or similar object (if the wall side
is too rigidity), you can make a hole by electric drill, then using
expanded screw tightening the bracket (Picture 3)
4. Children should be supervised to ensure that they do not play
with the appliance.
5. Household used only
6. Do not store explosive substances such as aerosol cans with
flammable propellant in this appliance.
7. If the supply cord is damaged, it must be replaced by the
manufacturer, by its service agent or similarly qualified persons in
order to avoid a hazard.
Bracket
Wall
