mabe EML27WWF0 Скачать руководство пользователя страница 70

Страница: 70 / 72

Ingeniería de Servicio

“Crackling” or “popping”

sound

This is the sound of the
metal heating and cooling
during both the cooking
and cleaning functions.

This is normal.

Excessive smoking
during a clean cycle

Excessive soil.

Touch the CLEAR/OFF pad. Open the
windows to rid the room of smoke. Wait
until LOCKED/DOOR goes off. After the
oven cools, wipe up the excess soil and
reset the clean cycle.

Oven door will not open
after a clean cycle

Oven too hot.

Allow the oven to cool below locking
temperature.

Oven not clean after a
clean cycle

Oven controls not properly
set.

See the Using the self-cleaning upper
and lower ovens section.

Oven was heavily soiled.

Clean up heavy spillovers before
starting the clean cycle. Heavily soiled
ovens may need to self-clean again or
for a longer period of time.

“LOCKED” flashes in the

display

The self-clean cycle has
been selected but the door
is not closed.

Close the oven door.

“LOCKED” is on when

you want to cook

The oven door is locked
because the temperature
inside the oven has not
dropped below the locking
temperature.

Touch the CLEAR/OFF pad. Allow the
oven to cool.

“F” and a number or letter

flash in the display

You have a function error
code.

Disconnect all power to the range for at
least 30 seconds and then reconnect
power. If the function error code
repeats, call for service.

Содержание EML27WWF0









































































Результаты поиска

Содержание EML27WWF0

Отзывы:

Бренды по названию

Популярные бренды

mabe EML27WWF0, Руководство по обслуживанию

Результаты поиска

Содержание EML27WWF0

Отзывы:

Бренды по названию

Популярные бренды