Ingeniería de Servicio
41
How to set the oven for Cleaning
The oven doors must be closed and all controls set correctly for the cycle to work properly.
1.- Touch
SELF CLEAN
pad.
A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-
clean time of 5 hours is recommended for a dirtier oven..
2.- If a time other than 5 hours or 3 hours is needed, use the number pads and enter the desired
clean time.
You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty
your oven is
3.- Press the
START
pad.
The oven door locks automatically. The cooktop elements are also locked out during self-clean.
The display will show the clean time remaining.
It will not be possible to open the oven doors or use the cooktop until the temperature drops below
the lock temperature and LOCKED/DOOR goes off in the control display.
When LOCKED/DOOR goes off, you will be able to open the doors.
•
The word LOCKED/DOOR will flash and the word door will display if you set the clean cycle
and forget to close the oven doors.
•
To stop a clean cycle, touch the OFF pad. When LOCKED/DOOR goes off, indicating the
ovens have cooled below the locking temperature, you will be able to open the doors.
•
When the oven is set to self-clean, oven will lock and the cooktop controls will lock out.
The oven and cooktop cannot be used when it is set to self-clean.
Содержание EML27WWF0
