MAAX Coleman Spas 100 Series, Руководство пользователя

Страница: 5 / 36

05
Important safety instructions
• Get a qualified engineer to carry out
the electrical connections.
• Replace damaged electrical cables
immediately.
• Keep an eye on the water condition.
Untreated water not only causes problems
for your spa and equipment, but is also a
health risk.
• Clean the filter element monthly or as often
as you consider necessary (see filter
maintenance (page 24).
• Position the spa so that it can be accessed
for maintenance from all sides.
• Use a bathing cap is you have long hair.
• Only use official care products for your spa,
so that the spa and water condition are
maintained at their very best.
DON’T:
• Use the spa for longer than 30 minutes
at 40 °C.
• Use an extension cable for the electricity
supply of your spa.
• Allow anyone to stand on the spa cover.
It is not designed to bear weight.
• Connect the spa’s electricity supply while
the spa is not filled to the level on the
skimmer indicated by an arrow.
• Use the pump for long periods of time at
high speed while the cover is on the spa.
Long-term use of the pump can cause a
build-up of heat and prevent the spa from
working properly.
Location and positioning
Choose a solid base for the spa, which is level
and flat, bearing in mind the weight of the spa
when full (some models weight more than
2000 kg). If you are not sure about the
load-bearing properties of your chosen site,
contact an architect or building contractor.
The total surrounding of the spa housing and
floor must be supported in the same way.
If your spa is being installed outside, we suggest
you create a solid base for the spa to stand on.
If you do not provide a level surface for your
spa, this could result in structural damage and
render the guarantee void.
When positioning the spa remember that all
four sides of the spa must be easily accessible for
repairs and maintenance. For this reason, we also
advise against sinking the spa into the ground.
Installing outdoors
If the spa is to be installed outdoors, please
take note of the following:
1. Local conditions with regard to fencing off.
2. Local regulations on electrical installations
and cabling.
3. The view from your house.
4. Wind direction.
5. Exposure to sunlight.
6. Positioning with regard to trees (branches,
leaves and shadow).
7. Location of cloakroom and bathroom.
8. Storage space for maintenance equipment
and chemicals.
9. Place from where adults can keep an eye
on children.
10. Landscaping and night lighting.
11. Accessibility to equipment.
12. Location of electricity supply and
circuit path.
Installation indoors
If the spa is to be installed indoors,
please take note of the following:
1. An indoor spa considerably increases
the air humidity. You can limit the effects
of this by using fans or a dehumidifier.
Consult your supplier for more information.
2. Drainage points must be installed in the area
around the spa in order to remove water that