will remain operational.
Exit the Power Save Mode:
then off to exit the power save mode.
Turn the ignition switch to on
Note: If the system is interfered by stronger radio frequency around, sources of high voltage
ay
. BATTERY REPLACEMENT
powers the Remote Transceiver. When the power of the battery
electric power or such Obstacles like tall buildings and so on, the transmission range m
get shorter as the system uses low out put powered frequency.
A
A 1.5V type AAA Alkaline battery
weakens a
icon shall be displayed on the LCD screen. When the old battery is replaced to
new one, there will be beep sounds to indicate the power is up and the clock on the LCD screen
returns to
AM12:00
after displaying all the icons. Correct the time by pressing
for 3 seconds
before using (See Timer Setting).
Note: Press
I
button two times when the battery compartment is empty, then insert the new
. THE REMORE LCD ICONS WITH FUNCTION
battery.
B
Armed Mode
Your motorcycle is in the armed
mode.
Disarm
m is Disarmed.
The syste
Remote Transmission
signal to
You are transmitting the
control unit.
te
In – Range Indicator
You are within the remo
control’s range.
Trigger on the Tilt Switch
(Zone 2) optional
lose Loop
Trigger on the C
(Zone 3).
Trigger on the Shock Sensor
(Zone 4)
Activate on the Warn away
Trigger
Trigger on the Ignition Switch
(Zone 5).
Time Monitor
Alert Alarm
morning call alarm.
You have set
Count Down Timer
is up for
Reminder when time
parking.
Power Save Mode
Save the battery power.
9