On (Solid)
Valet Mode
D. CHIRP INDICATORS
E. PARKING LIGHTS
Chirp Function
Parking
lights
Function
1 chirp
Arm
1 flash
Arm
2 chirps
Disarm
2 flashes
Disarm
4 chirps
Disarm / Triggered
3 flashes
Disarm / Triggered
6 chirps
Motorcycle Locator
12 flashes
Motorcycle Locator
F. SYSTEM OPERATING CONDITION
Siren, Horn
Parking Lights
LED
Starter
1. Arming
1 Chirp
1 Flash
Slow Flash
Disable
2. Disarming
2 or 4 Chirps
2 or 3 Flashes
Fast Flash or Off
3. Trigger
Alarming
Flashes
Slow Flash
Disable
4. Passive
Flash
Disable
5. Panic
Alarming
Flashes
6. Car Locator
6 Chirps
12 Flashes
G. ACTIVE ARMING
1. Press
I
button on transmitter.
2. The siren will chirp once and the parking lights will flash once indicating the
system is armed. The LED will begin to flash and the engine starter will be
disabled.
SILENT ARMING:
Press
III
button first, within 3 seconds, press
I
button on the
transmitter to arm your security system, No chirp sound will be heard. Arm
confirmation will be through the motorcycle’s parking lights only.
ARMING WITH NOISELESS MODE:
With the system disarmed, press
I
button once, the siren
will chirp once. Within 3 seconds, press
I
button again. The siren will emit one short chirp
indicating the system is set and will be fully armed in 5 seconds with the noiseless mode for one
arming cycle. In this mode, whenever vibration is presented to the protected motorcycle, the
shock sensor cannot trigger the system and the system will only emit a few warn away chirps.
ARMING WITH SHOCK SENSOR BY-PASS:
Pressing
I
button on the transmitter three times
within 5 seconds will arm the security system and by-pass the shock sensor. The system will chirp
one additional time to confirm the sensor bypass mode is activated. The sensor bypass feature is
programmed to activate for one arming cycle only. The security system will return to normal
operation during the next warning cycle.
PASSIVE STARTER DISABLE:
The purpose of the feature is to protect the motorcycle from
being stolen at all times, regardless of whether or not the alarm is armed.
The starter of the vehicle will be disabled 60 seconds after the ignition is turned off. Once the key
is turned off, the LED will flash fast for 60 seconds.
After the 60-second timer has elapsed, the LED will flash slowly (one-half its normal armed rate)
to indicate the passive starter disable is activated and the system will not respond to any trigger
input except the ignition trigger.
ARMING WITH PATHWAY ILLUMINATION:
Press
I
button once to arm the system, the siren will
chirp once. Within 3 seconds, press
F
button. The parking lights will turn “ON” for 30 seconds to
illuminate your pathway.
SILENT ALARM FUNCTION:
Press
I
and
II
buttons at the same time. The security system will
arm and with “Silent Alarm Function.” The siren /horn will silenced even if the sensor is triggered
in the armed status.
H. PASSIVE ARMING
Active arming and disarming is controlling your security system via the remote transmitter. This
5
