MA Lighting Technology GmbH . Dachdeckerstr. 16 . D-97297 Waldbüttelbrunn . Fax: + 49 9 31 4 97 94 29 . www.malighting.de
36
36
36
36
36
7.2 Changing Board Operation Mode
7.2.1 Switch Memories
Especially for working with color scrollers or multi-functional fixtures it is
possible to change the operation mode of the Switch Memories (see 2.3)
FLASH mode: The memory is on stage as long as the button is held down.
When using with Swop effect all other signals get erased during this time.
TOGGLE mode: The memory gets switched on by pushing the button.
It stays on stage and its LED stays on until the button is pressed a second
time.
The values of these TOGGLE memories are independent from main
master or blackout DBO and are not killed by the SWOP effect.
During X-fade operation mode on memories the TOGGLE memories work
independently. They can be switched on without affecting the running X-
fade.
KILL mode: Works as the TOGGLE mode, but selecting a new KILL
memory automatically clears the older one.
The Switch Memory mode gets selected via
UTILITY/
SETUP
SETUP
SWITCH
MEMORY
7.2.2 Keyswitch
All programs within the Lightcommander can be protected against
overwriting or clearing.
Key position:
Function
ALL ACCESS
Access to all desk functions
LOCK
All programming functions are locked.
PROGRAMMING
During PREVIEW mode the values can not be
changed. Only the speed parameters of the
chases can be adjusted.
LOCK DESK
The desk does not react to any operation on the
front panel. Running chases or remote programs
via MIDI (see 8.2) go on working.