Opening the LCD Panel
To open the LCD panel:
1.
Steady the base of the netbook with one hand.
2.
Hold a corner of the LCD panel with the other hand.
3.
Gently raise the LCD panel to the upright position.
A
Warning
Never slam the LCD panel shut, as this may damage the netbook.
Note
Do not grip the Built-in rotating camera when trying to open or close the LCD
panel.
Switching the Power On
Once you have connected your AC adapter or charged the battery pack, you
can power on your netbook.
When you power on your netbook, the Power-On Self Test (POST) runs
automatically to check the internal hardware and configuration. After the POST
is completed, your netbook loads the installed operating system.
If hardware configuration has been changed or the POST fails, a warning
message may appear on the screen. This message will inform you of any errors
or invalid settings, and prompt you to run the BIOS Setup Utility to correct the
problem.
14
