Rev 12-31-2013
Page 1 of 6
www.m7tuning.com
M7 Tuning
Ultimate MINI Performance
M7 R56 Carbon Fiber & Tegris Splitter
Factory Aero Bumper (Model years 2011-2013)
Installation Guide
M7 Tuning engineers and manufactures the highest quality MINI accessories and
performance parts available anywhere on the planet! Please read these
instructions completely BEFORE attempting to install this product. If you are not
confident you can do the work described or do not have the tools necessary
please contact a local M7 dealer (listed on or website
www.m7tuning.com
) or a
local accessory installation center to perform this work.
CONTENTS:
Qty
M7 P/N
Description
1
Splitter (Carbon Fiber or Tegris)
13
95-9006
#12 Truss Head Self Tapping Screw (1 extra)
13
95-4001
Expanding Retainer-Black Plastic (1 extra)
1
95-9005
AVK Insert Tool #10-32
3
95-5002
#10-32 Expanding NutSert
2
95-9012
APR Strut Rod
10
95-9013
Rubber washers 3/4" OD x 1/4" ID
1
95-2009-SS
#10-32 x 1 1/2" Button Head SS
4
95-3004-SS
#10-32 x 5/8" SHCS SS
9
95-7001-SS
#10 x 3/4" OD Flat fender washer
2
95-8019
#10-32 Half Height Nyloc Nut
1
99-1000
Sticker Pack
TOOLS NEEDED:
#2 Phillips screw driver (power nut driver recommended)
Electric drill
1/8” drill bit
¼” drill bit
3/8” drill bit
3/8” open end wrench
7mm open end wrench
8mm open end wrench
5/32” Allen wrench
Red Locktite (Thread locker)
A friend to help
