Rev 7/23/2014
Page 11 of 11
Ultimate MINI Performance
Re-Install the rear apron.
Installation is
reverse of removal (See first steps). The rear
apron has a threaded metal clip. This clip sits
over the factory bracket attached to the steel
bumper. Make sure that this clip is in place
before re-installing the apron.
Be sure to bolt down the final passenger side
attachment point (factory mounting point).
Final work.
The M7 Rear Lower Diffuser Tunnels are meant to be painted (unless fitted with the Carbon Fiber
option). The tunnels can now be easily removed to be prepped and painted. During final installation
torque all
fasteners to 30 in-lbs (3.5 Nm)
. We highly recommend all fasteners be installed with a drop of blue Locktite
(thread locker) to reduce the chance of the fasteners vibrating loose.
Apply a strip of foam tape between the diffuser tunnels and rear apron to eliminate vibration, squeaks and
scuffing.
This completes the installation of the M7 R56 Rear Diffuser Tunnels.
For further technical support, please e-mail
704-663-0094 Monday – Friday, 9:00am – 4:00pm EST.
Thank you again for your purchase – we appreciate your business.
Please like us on Facebook (
) and post a picture of your newly installed parts for
the MINI community to see. Or send us some photos for our archives. (
Enjoy the Ride………………..
Team M7
