VAN DER GRAAF
VERY LOW NOISE POWER SUPPLY
REVISION P
R
A – JUNE 2014
Copyright © 2014, M2Tech Srl
11
M2Tech
www.m2tech.biz
2. Front Panel
1
2
3
4
5
Figure 1
1) Global enable button.
Push this button to activate the
VAN DER GRAAF
when it’s in
standby (LED 4 on and LED 3 off). Following the operation of this button, all outputs
previously enabled by the user with their buttons (item 2, Fig. 1) will activate, in the
same sequence as the user manually activated them, with 1 second intervals. The
related LED’s will turn on to indicate activation. During the process, LED 3 blinks. At
the end of activation process, LED 3 glows steadily. When the
VAN DER GRAAF
is
active, user may put the
VAN DER GRAAF
in standby, disabling the outputs in reverse
